Virtex UltraScale+ HBM VCU128-ES1 FPGA Evaluation Kit
Product model : EK-U1-VCU128-ES1-G
2019-01-10 Times of browsing： 5629-
Product introduction
characteristic
Product specification
Physical picture
Resources
The VCU128 board incorporates the all new Xilinx VU37P HBM FPGA that utilizes stacked silicon interconnect to add HBM die next to the FPGA die on the package substrate. Xilinx’s high bandwidth memory (HBM)-enabled FPGAs are the clear solution to the computational bandwidth issues associated with using parallel memories like DDR4 on a PCB.
The VCU128 evaluation kit is optimized for quickly prototyping applications using Virtex UltraScale+ HBM FPGAs
8GB of on-chip High Bandwidth Memory (HBM)
Multiple external memory interfaces (RLDRAM3, QDR-IV, DDR4)
Quad 32Gbps QSFP28 Interfaces
PCIe Gen3 x16 & Gen4 x8
VITA 57.4 FMC+ Interface
10/100/1000 Mbps Ethernet
| Board Specifications | Value |
|---|---|
| Length | 9.5 inch (24.13 cm) |
| Height | 7.53 inch (19.14 cm) |
| Thickness (+/-5%) | 0.061 inch (0. 1549 cm) |
| Operating Environmental Temperature | 0◦C to +45◦C |
| Storage Environmental Temperature | -25◦C to +60◦C |
| Memory | |
| DDR4 Component | 4.5 GB – 5 x (512 Mb x 16) |
| QDR4 Component | 144 Mb – 1 x (4 Mb x 36) |
| RLD3 Component | 288 MB – 2 x (1.125 Gb x 36) |
| Communications & Networking | |
| QSFP28 Optical | 4 |
| Ethernet Port | 2 |
| PCIe Gen3 x16 or Gen4 x8 | 1 |
| USB UART | Yes |
| Display | |
| DIP Switches | Yes |
| LEDs | Yes |
| Push buttons | Yes |
| Expansion Connectors | |
| FMC+-HSPC connector | 1 |
| Control & I/O | |
| IIC | Yes |
| PMBUS | Yes |
| Power | |
| 12V wall adapter | Yes |
| ATX power compatible | Yes |
